,

SIEMENS SITRANS FP230/FPS200 Differential Flow Sensor

$0.00

& Free Shipping

Siemens SITRANS FP230/FPS200: Your Solution for Precise Flow Measurement

SITRANS FP230/FPS200 primary elements and transmitters offer standardised mechanical flow sensors, also known as differential pressure transducers. Manufactured in accordance with EN ISO 5167 standards, these devices ensure accurate and reliable flow measurement.

By constricting the line diameter within the pressure device, the flow rate generates a differential pressure, which is then converted into a proportional current signal or flow value by the differential pressure transmitter. The correlation between differential pressure and flow is established through a calculation performed by the primary differential pressure device.

Benefits

Ideal for single-phase media such as gas, steam, and solids-free liquids, SITRANS FP230/FPS200 finds applications in various industries including technical gases, compressed air, fresh and combustion air, steam/heat quantities, heat transfer fluids, and water.

Experience precision and efficiency in flow measurement with SITRANS FP230/FPS200 primary elements and transmitters.

  • Suitable for universal use across the globe and widely accepted in all industries
  • Very robust and can be used in a wide range of nominal diameters
  • Suitable for high temperature and pressure ranges
  • Low uncertainty of measurement
  • No wet calibration required as they use an internationally standardised flow rate measurement procedure
  • Differential pressure transmitter can be used over a long distance from the measuring location
  • Differential pressure method is well known and has a large installed base
  • SITRANS P differential pressure transmitter is easy to parameterise again if process data change. They are adapted by recalculating and assigning new parameters to the transmitter or, in case of an orifice plate with annular chamber, by using a new orifice plate

Product Data Sheet – Siemens SITRANS FP230/FPS200 Differential Flow Sensor

Operation Manual – Siemens SITRANS FP230/FPS200 Differential Flow Sensor

Detail

Application

 

Differential pressure orifice meter

  • Steam (saturated, superheated)
  • Gas (dry, up to 100% water saturated)
  • Liquids (water, non-conductive liquids, oil, etc.)
Input

(Measuring Range)

Typically between up to 1:5 … 1:10

(real measurement range depends on transmitter performance and non-linearity of coefficient of discharge)

Output 4 … 20 mA (When paired with pressure transmitter)
Measuring Accuracy Typically, in the range of 0.5 … 1.2%

(depends on application and final design)

Operating conditions Max. PN 100 or Class 600

(higher pressure ratings on request)

According to EN 1092-1 or ASME B16.5

(exact maximum temperature depends on sensor design)

Degree of Protection Dependent of Configuration
Weight Dependent of Configuration
Electrical Connections Dependent of Configuration
Explosion Protection IECEx (Dependent of configuration)
Shopping Cart
SIEMENS SITRANS FP230/FPS200 Differential Flow Sensor
$0.00

Enquiry Form